www.nordicmessaging.se

EMG 5.5.1 - User's Guide

Table of ContentsPreviousNextIndex

D. Error codes

In the connector log files protocol specific error codes may be displayed within parenthesis when send or receive operations fail. The most common of these error codes are specified below, per protocol.

D.1 CIMD2

Error code
Description
0
No error
1
Unexpected operation
2
Syntax error
3
Unsupported parameter error
9
Requested operation failed
100
Invalid login
102
Too many users with this login id
103
Login refused
300
Incorrect destination address
302
Syntax error in user data parameter
303
Incorrect user data parameter combination

D.2 SMPP

Error code
Description
0
No error
3
Invalid command id
4
Invalid bind status for given command
5
ESME already in bound state
8
System error
10
Invalid source address
11
Invalid destination address
12
Message ID is invalid
13
Bind failed
14
Invalid password
15
Invalid system id
20
Message queue full
21
Invalid system type
88
Throttling error (ESME has exceeded allowed message limits)
97
Invalid scheduled delivery time
98
Invalid message validity period

D.3 UCP/EMI

Error code
Description
1
Checksum error
2
Syntax error
3
Operation not supported by system
4
Operation not allowed
5
Call barring active
6
AdC (destination address) invalid
7
Authentication failure
22
Time period not valid
23
Message type not supported by system
24
Message too long

D.4 OIS

Error code
Description
0
Success
1
Invalid data
2
atabase (message data store) full
3
SME busy
5
Duplicate message
6
Destination unavailable
20
Call barred by user
21
Transmission error
24
Unknown subscriber
25
Call barred by network operator (destination)
26
Call barred by network operator (originator)
120
Network failure

D.5 HTTP

Error code
Description
200
Success
400
Bad request
401
Unauthorized
403
Forbidden
404
Not found
500
Internal error
501
Not implemented
301
Moved
304
Not modified

D.6 SMTP

Error code
Description
220
Service ready
250
Requested mail action ok
251
User not local will forward to
421
Service not available
450
Mailbox unavailable
451
Requested action aborted
452
Requested action not taken
500
Syntax error, command unrecognized
501
Syntax error in parameter or arguments
502
Command not implemented
503
Bad sequence of commands
504
Command parameter not implemented
550
Requested action not taken

D.7 MGP

Error code
Description
0
OK, no error
1
Unknown
2
Syntax error
3
Login
4
Already bound
5
Invalid arguments
6
Invalid command
7
Invalid message id
8
Invalid destination address
9
Invalid source address
10
No access
11
Message error
12
Invalid response
13
Communication error
14
Database error
15
UDH error
16
No credits left
17
Busy
18
Too long

MGP message status codes are described in section C.2.43.

Table of ContentsPreviousNextIndex